| Business Type | Manufacturer, Supplier |
| Application | Used For Tilting Forklift Masts,Forklift Operations |
| Product Name | Forklift Tilt Cylinder |
| Compatibility | Compatible With Various Forklift Models |
Core Technical Attributes & Specifications 1. Hydraulic & Operating Parameters
Type: Double-Acting Hydraulic Cylinder (uses hydraulic pressure for both extension/forward tilt and retraction/backward tilt).
Working Pressure: Ranges from 14 MPa to 21 MPa (140 to 210 Bar / 2000 to 3000 PSI), depending on truck capacity class.
Standard Tilt Angles:
Forward Tilt: Typically 5° to 6° (prevents dropping loads forward).
Backward Tilt: Typically 10° to 12° (provides stability during transit).
2. Physical Dimensions & Sizing
Bore Diameter ($varnothing$): Typically 50 mm to 100 mm based on forklift capacity (1.5-ton to 10-ton).
Piston Rod Diameter ($varnothing$): Typically 25 mm to 50 mm, engineered to resist bending under heavy lateral and axial forces.
Stroke Length: Varies relative to mast design (commonly 35 mm to 200 mm).
Mounting / Connection: Features eyelet clevis pins or spherical plain bearings on both ends (rod end and base end) for pivoting smooth clearance.
3. Component Construction
Cylinder Tube: Heavy-walled, seamless precision-honed steel pipe designed to endure high fluid pressure cycles.
Piston Rod: Induction-hardened carbon steel with hard chrome plating to resist corrosion, scratches, and harsh outdoor working conditions.
Sealing Package: Polyurethane (PU) U-cups, dust wiper seals, buffer seals, and nitrile rubber O-rings designed to retain high-pressure hydraulic fluid and exclude dirt/debris.
Flow Control / Restrictor Valves: Often includes internal velocity fuses or flow control valves to prevent the mast from slamming forward if a hydraulic line breaks.
Key Role & Installation Pairs
Pair Configuration: Most forklifts utilize two tilt cylinders (one left-hand and one right-hand) working in parallel to maintain even mast torque and prevent frame twisting.
Maintenance Attributes: Equipped with grease nipples/fittings on mounting pins/bushing ends for periodic lubrication. Rebuilding is straightforward using model-specific hydraulic seal kits.
Raise your Query
Hi! Simply click below and type your query.
Our experts will reply you very soon.